Automatic Tube Counter Monitoring System using Infrared Sensor based on NODEMCU ESP8266
DOI:
https://doi.org/10.31961/eltikom.v7i2.921Keywords:
E18-D80NK infrared sensor, internet of things, LPG tube calculation, NodeMCU ESP8266Abstract
Technology is needed in every industry because it can simplify the production process, improve production quality, and enhance the company's reputation in the sight of consumers. The cylinder counting activity at PT Batuah Energi Indonesia is still done manually, involving time and standardized estimation of LPG cylinder loads, which faces inaccuracy issues. In fact, PT Batuah Energi Indonesia has facilities that handle many LPG cylinders from various users and providers of LPG cylinders. While accurate cylinder counts are beneficial to the industry, companies need technology that can automatically calculate the number of filled LPG cylinders. Therefore, this study was carried out to demonstrate to students how to develop automatic tube counters using an infrared E18-D80NK as a tube detector, NodeMCU microcontrollers ESP8266 as controllers, Arduino IDE for developing programs, and IoT for remote monitoring. The developed device approach, specifically using the E18-D80NK infrared proximity sensor based on the NodeMCU ESP8266, can be coded using the Arduino IDE compiler. For the detection of the number of tubes, the E18-EN80K infrared sensor is used and data transmission wirelessly utilizes the Blynk application. The results of the automatic tube counter monitoring tool were successfully tested with a 100% accuracy rate, utilizing the E18-D80NK infrared sensor and NodeMCU microcontroller ESP8266, and can be monitored remotely using Blynk.
Downloads
References
U. Suwardoyo, “Monitoring kapasitas tabung gas berbasis Internet of things (iot),” J. Sintaks Log., vol. 2, no. 1, pp. 272–277, 2022.
A. Sunata and R. Rino, “Jurnal Algor Rancang Bangun Alat Penghitung Jumlah Produksi Dengan Menggunakan Microcontroller Load Cell Berbasis Web Service,” ALGOR, vol. 1, no. 2, pp. 59–66, 2020.
A. Rafli, D. Setiyadi, and S. Rofiah, “Sistem Monitoring Penghitungan Barang Otomatis Berbasis Internet of Things,” J. ICT Inf. Commun. Technol., vol. 19, no. 1, pp. 41–49, 2020.
A. Husain, D. C. Siregar, and S. H. Permadi, “Alat Penghitung Barang Secara Otomatis Menggunakan Sensor Infrared Berbasis Arduino Uno,” J. CERITA, vol. 6, no. 2, pp. 198–205, 2020.
A. Fauzan and S. Sukardi, “Rancang Bangun Alat Visitor Counter Berbasis NodeMCU Esp8266 dan Bot Aplikasi Telegram,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 2, pp. 334–344, 2022.
F. Susanto, “Prototype Perhitungan Meterial Conveyor Berbasiskan Mikrokontroler Arduino Uno,” Petir, vol. 14, no. 1, p. 522726, 2020.
R. Paradila and M. Arifin, “Pengujian Rancangan Sistem Cuci Tangan Tanpa Sentuh Dengan Memanfaatkan E18-D80NK Infrared Proximity Sensor dan Solenoid Valve,” in Prosiding Seminar Nasional Fisika, 2020, pp. 230–234.
M. F. Adibrata, “Monitoring Sistem Penghitungan Barang Otomatis Menggunakan Nodemcuesp8266.” Universitas Sumatera Utara, 2020.
D. Febriasti, “Pembuatan Alat Penghitung Barang Logam Menggunakan Sensor Infrared Berbasis IoT di CV Apindo Brother Sukses,” 2022.
R. G. Paramananda, H. Fitriyah, and B. H. Prasetio, “Rancang Bangun Sistem Penghitung Jumlah Orang Melewati Pintu menggunakan Sensor Infrared dan Klasifikasi Bayes,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 3, pp. 921–929, 2018.
R. Mentari and A. A. Istiningrum, “Evaluasi Kebutuhan Unit Filling Machine LPG Kemasan Tabung 3 KG: Studi Kasus pada Depot LPG X,” INOBIS J. Inov. Bisnis dan Manaj. Indones., vol. 1, no. 2, pp. 172–182, 2018.
T. Budioko, “Sistem monitoring suhu jarak jauh berbasis internet of things menggunakan protokol mqtt,” in Proceeding Seminar Nasional Riset Teknologi Informasi-SRITI 2016, STMIK AKAKOM Yogyakarta, 2016, pp. 353–358.
E. Jajuli, M. R. Effendi, L. Kamelia, R. Mardiati, D. Miharja, and E. A. Z. Hamidi, “The Implementation of Motorcycle Security System Using Voice Commands and Fingerprint Sensors,” in 2021 15th International Conference on Telecommunication Systems, Services, and Applications (TSSA), IEEE, 2021, pp. 1–6.
P. Shelke, S. Kulkarni, S. Yelpale, O. Pawar, R. Singh, and K. Deshpande, “A NodeMCU based home automation system,” Int. Res. J. Eng. Technol, vol. 5, no. 6, pp. 127–129, 2018.
Y. M. Djaksana and K. Gunawan, “Perancangan Sistem Monitoring Dan Kontroling Pompa Air Berbasis Android,” SINTECH (Science Inf. Technol. J., vol. 4, no. 2, pp. 146–154, 2021.
A. Khan, “Review of techniques and methods for object detection,” Int. J. Adv. Comput. Sci. Technnology, vol. 8, no. 2, pp. 1–5, 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal ELTIKOM : Jurnal Teknik Elektro, Teknologi Informasi dan Komputer
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
