Internet of Things- Based Automatic Feeder and Monitoring of Water Temperature, PH, and Salinity for Litopenaeus Vannamei Shrimp
DOI:
https://doi.org/10.31961/eltikom.v7i1.658Keywords:
automatic feeder, PH, salinity, temperature, vannamei shrimp, water monitoringAbstract
Aquaculture of Litopenaeus Vannamei shrimp is one of Indonesia's most crucial commodity export shrimp. Aquaculture feed management and environmental management are essential factors in determining shrimp sustainability. To maximize shrimp farming results, proper feeding, water quality control, and con-tinuous monitoring of three critical parameters: temperature, power of hydrogen (pH), and salinity levels in ponds are required. This study aims to feed the shrimp automatically at predetermined times (07.00, 11.00, 16.00 and 20.00). At the same time, it will monitor pond water quality parameters. Temperature, pH and salinity are all factors monitored. Every 10 minutes, monitored data is stored in ThingSpeak using IoT technology. The design goal has a specific threshold to avoid future problems. A Telegram notification is sent every 10 seconds when the water condition exceeds the threshold. The overall accuracy rate of 98.81%, pH of 96.6%, and salinity of 99.17% demonstrate that the system works correctly.
Downloads
References
Direktorat Jenderal Perikanan Budidaya (DJPB), “Udang Vaname dan Udang Windu Masih Andalan Ekspor Indonesia,” 2014. http://www.djpb.kkp.go.id/arsip/c/246 (accessed Feb. 20, 2023).
Balai Perikanan Budidaya Air Payau Situbondo, “Budidaya Udang Vaname Di Tambak Milenial (Millenial Shrimp Farming/MSF),” 2021. https://kkp.go.id/djpb/bpbapsitubondo/artikel/34255-budidaya-udang-vaname-di-tambak-milenial-millenial-shrimp-farming-msf (accessed Feb. 23, 2023).
E. Y. Setyawan, “Produksi Budi Daya Udang di Indonesia,” Balai Besar Riset Sosial Ekonomi Kelautan dan Perikanan, 2022. https://kkp.go.id/brsdm/sosek/artikel/39265-produksi-budi-daya-udang-di-indonesia
Supito, Teknik Budidaya Udang Vaname (Litopenaeus vannamei). Balai Besar Perikanan Budidaya Air Payau Jepara, 2017.
H. S. Suwoyo and E. A. Hendrajat, “High density aquaculture of white shrimp (Litopenaeus vannamei) in controlled tank,” in IOP Conference Series: Earth and Environmental Science, 2021, vol. 777, no. 1, p. 12022.
Khushbu, R. Gulati, Sushma, and P. Sharma, “Shrimp Culture (Litopenaeus Vannamei) and Its Management,” Bhumi Publishing, 2022.
O. Juarno, R. Oktaviani, A. Fauzi, and N. Nuryartono, “Kinerja Produktivitas dan Faktor yang Berpengaruh Terhadap Total Factor Productivity (TFP) Tambak Udang Indonesia,” J. Sos. Ekon. Kelaut. dan Perikan., vol. 6, no. 2, pp. 149–168, 2017.
I. Kurniawan, A. B. Witarto, and Z. Zulkiflienmansyah, “Kewirausahaan Sosial Sebagai Landasan Transfer Teknologi (Studi Kasus Tambak Udang Sumbawa),” JMM UNRAM-Master Manag. J., vol. 10, no. 1A, pp. 21–32, 2021.
F. J. Rizky, R. S. Hari, H. Supendar, and I. Budiawan, “Tambak-Ku: Sarana Penunjang Dalam Industri Udang Untuk Mengkuti Pekembangan Era Industri 4.0,” J. Infortech, vol. 2, no. 2, pp. 145–152, 2020.
K. R. S. R. Raju and G. H. K. Varma, “Knowledge based real time monitoring system for aquaculture using IoT,” in 2017 IEEE 7th international advance computing conference (IACC), 2017, pp. 318–321.
M.-C. Chiu, W.-M. Yan, S. A. Bhat, and N.-F. Huang, “Development of smart aquaculture farm management system using IoT and AI-based surrogate models,” J. Agric. Food Res., vol. 9, p. 100357, 2022.
A. Abu-Khadrah, G. F. Issa, S. Aslam, M. Shahzad, K. Ateeq, and M. Hussain, “IoT Based Smart Fish-Feeder and Monitoring System,” in 2022 International Conference on Business Analytics for Technology and Security (ICBATS), 2022, pp. 1–4.
F. Darmalim, A. A. Hidayat, T. W. Cenggoro, K. Purwandari, S. Darmalim, and B. Pardamean, “An integrated system of mobile application and IoT solution for pond monitoring,” in IOP Conference Series: Earth and Environmental Science, 2021, vol. 794, no. 1, p. 12106.
I. Arditya, T. A. Setyastuti, F. Islamudin, and I. Dinata, “Design of Automatic Feeder for Shrimp Farming Based on Internet of Things Technology,” Int. J. Mech. Eng. Technol. Appl., vol. 2, no. 2, pp. 145–151, 2021.
T. S. Mukti and H. Boedinugroho, “Rancang Bangun Sistem Otomatisasi Pemberian Pakan pada Budidaya Udang Vaname (Litopenaeus Vannamei) Menggunakan Mikrokontroller ATMEGA 32,” Institut Teknologi Sepuluh Nopember, 2018.
S. T. John, B. K. Roy, P. Sarkar, and R. Davis, “IoT enabled real-time monitoring system for early-age compressive strength of concrete,” J. Constr. Eng. Manag., vol. 146, no. 2, p. 5019020, 2020.
J. Fahana, R. Umar, and F. Ridho, “Pemanfaatan Telegram Sebagai Notifikasi Serangan untuk Keperluan Forensik Jaringan,” Query J. Inf. Syst., vol. 1, no. 2, 2017.
E. Ponciano, “What is Calibration?,” Calibrationawareness.com, 2017. https://calibrationawareness.com/calibration-awareness-what-is-calibration (accessed Sep. 09, 2022).
Components101, “DS18B20 Temperature Sensor,” 2018. https://components101.com/sensors/ds18b20-temperature-sensor (accessed Sep. 09, 2022).
Fisher Scientific, “Thermo ScientificTM EutechTM PC 450 Multi-parameter Meter Kit,” 2023. https://www.fishersci.co.uk/shop/products/eutech-pc-450-multi-parameter-meter-kit/15347063 (accessed Sep. 09, 2022).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal ELTIKOM : Jurnal Teknik Elektro, Teknologi Informasi dan Komputer
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
